People living in extremely higher and lower temperature have understood the importance of air conditioner for their comfortable life. The demand of air conditioner is building up so people are searching for the best product available on the market.
Mini-split has captured the attention and interest of people owing to its benefits compared to the traditional and central air-conditioner. You should have the knowledge about the proper installation of the mini-split in your house. Click here If you want to have in-depth information about the proper installation and hiring of the expert technician.
As the installation of mini-split is not a complex task, people with some knowledge about the electric work can install the mini-split of their own. But, it is always recommended to hire a professional expert from the company.
Here are some of the general tips for the successful installation of mini-split
Unit Capacity and Weigh in the Charge
Before installation, you should know the unit capacity that a room can hold. The wall or the location should be strong enough to support the weight of the unit. The weight of the charge should be on the line set length.
Application Requirements
The minimum ambient should be calculated so as to prevent the compressor problems during the operations. Adjust the standard ambient accordingly. Before installing the mini-split, be aware of the standard ambient required for the system.
Line Sets
Connect the piping lines from the indoor unit to the outdoor unit. Make sure the pipe lengths have the bending allowance to ensure the good performance of the unit. It is always recommended to follow the published maximum line sets.
Unit Location
You should select the open location to mount the indoor air conditioning unit. This will allow the air to pass smoothly and temperature sensing becomes accurate. It should be minimum six feet from the floor so that the unit works reliably and correctly.
Filter Cleaning
The mini-split has the installed filter in it. It is necessary to get information about the cleaning of these filters. You should know the importance of keeping it clean and replacing it periodically to prevent your air conditioner free of odors and contaminations.
Power Supply
You need to maintain the power supply from the indoor unit to the outdoor unit directly without the use of any junction box or indoor disconnect switch.
Control Wiring and Voltage
Follow the label to connect the wiring from indoor unit to outdoor unit. You should know about the polarity while the wiring is done because the voltage may be polarity sensitive. You should control the voltage as required by the product.
Liquid and Suction Lines
In order to prevent the liquid line from sweating, the liquid and the suctions lines must be insulated. So, the use of filters-driers and sight glasses are not suggested.
The benefits of creating own zoned areas, energy efficiency, and the split system have created hype for the demand of the product. Though it is easy to install ductless mini splits, you should not install it on your own. For the correct fitting, you need to hire a professional expert and follow proper installation instructions.